SisAl Pilot aims to demonstrate a patented novel industrial process to produce silicon (Si, a critical raw material), enabling a shift from today’s carbothermic Submerged Arc Furnace (SAF) process to a far more environmentally and economically alternative: an aluminothermic reduction of quartz in slag that utilizes secondary raw materials such as aluminium (Al) scrap and dross, as replacements for carbon reductants used today. SisAl Pilot represents a path-breaking approach, and a strong contribution to “circularity” through industrial symbiosis where the Al industry will act as both a raw material supplier and end user to the Si industry. Across sectors, SisAl Pilot will give substantial reductions in material yield losses, enhanced valorisation of waste- and by-product streams, at a 3 X lower energy consumption and radically lower emissions of CO2 and harmful pollutants, at a considerably lower cost. The SisAl Pilot project brings together raw material provider (Erimsa), silicon and aluminium key actors (Wacker, Elkem, DOW, Silicor, SiQAl, Hydro, FRey, Befesa, MYTIL), SME´s/consultants/ equipment manufacturers (BNW, SIMTEC, WS and SBC) and research organisations (NTNU, RWTH, NTUA, ITMATI, SINTEF, HZDR, MINTEK) to demonstrate the SisAl process with different raw materials and product outputs in 4 different countries. These pilots will be accompanied by environmental, economic and technological benchmarking, and industrial business cases will be assessed for locations in Norway, Iceland, Germany, Spain and Greece. The timing of SisAl Pilot is impeccable; the transformation to a circular economy, the strongly enhanced focus on climate and future expected EU-ETS CO2 allowances with associated risk for carbon leakage from Europe, the rapidly increased difficulty of exporting aluminium scrap from Europe to China, and modern society’s ever-increasing need for silicon metal. With SisAl, all these challenges are turned into new European opportunities.

The HEPHAESTUS project is built around one key, overarching objective: To develop a set of scalable and tuneable unit operations, to be built as integrated processing plant, featuring the capacity to treat multiple process wastes deriving from primary mineral and metallurgical (primary and secondary) streams. The unit operations are: - Clean-Tech electric furnace, to transform the EAF and AOD dust into metal alloy to be immediately remelted, process supported with streams of fines by-products from the mineral primary extractions (construction, aggregates and dimensional stone) - EZINEX process, to extract the zinc present in the dust of the furnace - Fibre drawing, for mineral wool manufacturing out of the process slag in molten state - Catalytic conversion of CO2 gas into methanol or formic acid - Ammonia-ammonium carbonate (AAC) and methanesulfonic acid (MSA) based hydrometallurgical processes, to produce a recyclable Fe-rich residue and to recover metals (e.g.e.g., ZnS) from EAF dust The project is targeting primarily small-scale applications (order of magnitude 10 k tons waste dust per year), to cope with the typically fragmented European process size. Such scale is matching the waste volumes and differentiation and granting positive environmental AND economic sustainability through the valorisation of different streams of by-products at low operational and capital expenditure, ensuring vast replicability and short ROI Project will be demonstrated in two pilot applications, in Greece and Italy, with the purpose of creating awareness on the business potential and to generate the conditions for a long-term exploitation, leading to meaningful reduction of wastes for the extractive and steel industries.

AlSiCal is an ambitious Research and Innovation effort to make the mineral and metal industry more sustainable and environmentally sound. The project will further research, develop and de-risk a groundbreaking concept; the patented Aranda-Mastin (AM) technology. This technology enables the co-production of three essential raw materials (alumina, silica and precipitated calcium carbonate), using new resources - e.g. anorthosite, abundantly available worldwide - whilst generating ZERO Bauxite Residue and ZERO CO2. Today´s production of these raw materials is a long way from being environmentally friendly: they are obtained through traditional processes that generate large CO2 emissions, and bauxite residue in the case of alumina production from bauxite by the Bayer process. AlSiCal will research and develop the innovative AM technology that allows: • Green co-production of 3 essential raw materials, in a single process and from one source, with synergetic environmental and economic benefits • Efficient use of anorthosite, a mineral abundant in Europe and worldwide • Integrated CO2 use and capture for ZERO CO2 emissions from production • ZERO Bauxite Residue generation from alumina production AlSiCal will de-risk and develop (from TRL 3-4 to TRL 4-5) the AM technology under sustainability and efficiency principles. It will assess and quantify the: techno-economic feasibility, potential value creation for Europe, Life Cycle Analysis, impact and risks of this technology upon the key sustainability pillars: economy, society and environment. AlSiCal will be performed by a balanced team of R&D and industrial partners representing the whole value chain. AlSiCal will set a roadmap for exploitation of the project results, to foster the later commercialization of the technology. Targeted dissemination and communication actions will contribute to increasing social and industrial engagement for developing innovative sustainable technologies for mineral processing.

The answer to the current Raw Material supply challenge faced today in Europe, lies in technological innovations that increase the efficiency of resource utilization and allow the exploitation of yet untapped resources such as industrial waste streams and metallurgical by-products. One of the key industrial residues which is currently not or poorly valorised is Bauxite Residue (BR, more commonly known as “red mud”) from alumina refineries. Bauxite residue reuse solutions do exist as stand-alone but pooling them together in an integrated manner is the only way to render bauxite residue reuse viable from an economical point of view and acceptable for the industry The RemovAl project will combine, optimize and scale-up developed processing technologies for extracting base and critical metals from such industrial residues and valorising the remaining processing residues in the construction sector. In term of technological aspects, RemovAl will process several by-products from the aluminium sector and from other metallurgical sectors in Europe (SiO2 by-products, SPL, fly ash,and others). The different waste streams will be combined to allow for optimal and viable processing in different technological pilot nodes. The technologies and pilots in most cases have already been developed in previous or ongoing projects and through RemovAl they will be pooled together and utilized in a European industrial symbiosis network. In term of societal or non-technological aspects, RemovAl will gather key sectors like the non-ferrous metal and cement sectors in order to secure a true industrial symbiosis through a top-down approach considering also legislation and standardisation at European level in order to facilitate the implementation of the most promising technical solutions.

To tackle its (critical) raw material dependency, Europe needs comprehensive strategies based on sustainable primary mining, substitution and recycling. Freshly produced flows and stocks of landfilled industrial residues such as mine tailings, non-ferrous slag and bauxite residue (BR) can provide major amounts of critical metals and, concurrently, minerals for low-carbon building materials. The European Training Network for Zero-Waste Valorisation of Bauxite Residue (REDMUD) therefore targets the vast streams of new and stockpiled BR in the EU-28. BR contains several critical metals, is associated with a substantial management cost, whereas spills have led to major environmental incidents, including the Ajka disaster in Hungary. To date, zero-waste valorisation of BR is not occurring yet. The creation of a zero-waste BR valorisation industry in Europe urgently requires skilled scientists and engineers, who can tackle the barriers to develop fully closed-loop environmentally-friendly recovery flow sheets. REDMUD trains 15 researchers in the S/T of bauxite residue valorisation, with emphasis on the recovery of Fe, Al, Ti and rare earths (incl. Sc) while valorising the residuals into building materials. An intersectoral and interdisciplinary collaboration of EU-leading institutes and scientists has been established, which covers the full value chain, from BR to recovered metals and new building materials. Research challenges include the development of efficient extraction of Fe, Al, Ti and rare earths (incl. Sc) from distinct (NORM classified) BRs and the preparation of new building materials with higher than usual Fe content. By training the researchers in pyro-, hydro- and ionometallurgy, electrolysis, rare-earth extraction and separation technology, inorganic polymer and cement chemistry, Life Cycle Assessment (LCA), NORM aspects and characterisation, they become the much needed scientists and engineers for the growing European critical raw materials industry.